Biomechanical Stability of Third-Generation Adjustable Suture Loop Devices Versus Continuous Loop Button Device for Cortical Fixation of ACL Tendon Grafts.

Background: Concerns regarding the primary stability of early adjustable loop button (ALB) devices for cortical fixation of tendon grafts in anterior cruciate ligament reconstruction (ACLR) have led to the development of new implant designs. Purpose: To evaluate biomechanical stability of recent ALB implants in comparison with a continuous loop button (CLB) device. Study Design: Controlled laboratory study. Methods: ACLR was performed in a porcine model (n = 40) using 2-strand porcine flexor tendons with a diameter of 8 mm. Three ALB devices (Infinity Button [ALB1 group]; Tightrope II RT [ALB2 group]; A-TACK [ALB3 group]) and 1 CLB device (FlippTack with polyethylene suture) were used for cortical tendon graft fixation. Cyclic loading (1000 cycles up to 250 N) with complete unloading were applied to the free end of the tendon graft using a uniaxial testing machine, followed by load to failure. Elongation, stiffness, yield load, and ultimate failure load were recorded and compared between the groups using a Kruskal-Wallis test with post hoc Dunn correction. Results: Elongation after 1000 cycles at 250 N was similar between groups (ALB1, 4.5 ± 0.7 mm; ALB2, 4.8 ± 0.8 mm; ALB3, 4.5 ± 0.6 mm; CLB, 4.5 ± 0.8 mm), as was load to failure (ALB1, 838 ± 109 N; ALB2, 930 ± 89 N; ALB3, 809 ± 103 N; CLB, 842 ± 80 N). Stiffness was significantly higher in the ALB1 group compared with the CLB group (262.3 ± 21.6 vs 229.3 ± 15.1 N/mm; P < .05). No significant difference was found between the 4 groups regarding yield load. Constructs failed either by rupture of the loop, breakage of the button, or rupture of the tendon. Conclusion: The tested third-generation ALB devices for cortical fixation in ACLR withstood cyclic loading with complete unloading without significant differences to a CLB device. Clinical Relevance: The third-generation ALB devices tested in the present study provided biomechanical stability comparable with that of a CLB device. Furthermore, ultimate failure loads of all tested implants exceeded the loads expected to occur in the postoperative period after ACLR.

Isometry of anteromedial reconstructions mimicking the deep medial collateral ligament depends on the femoral insertion.

PURPOSE: This study aimed to investigate the length change patterns of the native deep medial collateral ligament (dMCL) and potential anteromedial reconstructions (AMs) that might be added to a reconstruction of the superficial MCL (sMCL) to better understand the control of anteromedial rotatory instability (AMRI). METHODS: Insertion points of the dMCL and potential AM reconstructions were marked with pins (tibial) and eyelets (femoral) in 11 cadaveric knee specimens. Length changes between the pins and eyelets were then tested using threads in a validated kinematics rig with muscle loading of the quadriceps and iliotibial tract. Between 0° and 100° knee flexion, length change pattern of the anterior, middle and posterior part of the dMCL and simulated AM reconstructions were analysed using a rotary encoder. Isometry was tested using the total strain range (TSR). RESULTS: The tibiofemoral distance of the anterior dMCL part lengthened with flexion (+12.7% at 100°), whereas the posterior part slackened with flexion (-12.9% at 100°). The middle part behaved almost isometrically (maximum length: +2.8% at 100°). Depending on the femoral position within the sMCL footprint, AM reconstructions resulted in an increase in length as the knee flexed when a more centred position was used, irrespective of the tibial attachment position. Femoral positioning in the posterior aspect of the sMCL footprint exhibited <4% length change and was slightly less tight in flexion (min TSR = 3.6 ± 1.5%), irrespective of the tibial attachment position. CONCLUSION: The length change behaviour of potential AM reconstructions in a functionally intact knee is mainly influenced by the position of the femoral attachment, with different tibial attachments having a minimal effect on length change. Surgeons performing AM reconstructions to control AMRI would be advised to choose a femoral graft position in the posterior part of the native sMCL attachment to optimise graft length change behaviour. Given the high frequency of MCL injuries, sufficient restoration of AMRI is essential in isolated and combined ligamentous knee injuries. LEVEL OF EVIDENCE: There is no level of evidence as this study was an experimental laboratory study.

Valgus malalignment causes increased forces on a medial collateral ligament reconstruction under dynamic valgus loading: A biomechanical study.

PURPOSE: To investigate the forces on a medial collateral ligament (MCL) reconstruction (MCLR) relative to the valgus alignment of the knee. METHODS: Eight fresh-frozen human cadaveric knees were subjected to dynamic valgus loading at 400 N using a custom-made kinematics rig. After resection of the superficial medial collateral ligament, a single-bundle MCLR with a hamstring tendon autograft was performed. A medial opening wedge distal femoral osteotomy was performed and fixed with an external fixator to gradually adjust the alignment in 5° increments from 0° to 10° valgus. For each degree of valgus deformity, the resulting forces acting on the MCLR were measured through a force sensor and captured in 15° increments from 0° to 60° of knee flexion. RESULTS: Irrespective of the degree of knee flexion, increasing valgus malalignment resulted in significantly increased forces acting on the MCLR compared to neutral alignment (p < 0.05). Dynamic loading at 5° valgus resulted in increased forces on the MCLR at all flexion angles ranging between 16.2 N and 18.5 N (p < 0.05 from 0° to 30°; p < 0.01 from 45° to 60°). A 10° valgus malalignment further increased the forces on the MCLR at all flexion angles ranging between 29.4 N and 40.0 N (p < 0.01 from 0° to 45°, p < 0.05 at 60°). CONCLUSION: Valgus malalignment of the knee caused increased forces acting on the reconstructed MCL. In cases of chronic medial instabilities accompanied by a valgus deformity ≥ 5°, a realigning osteotomy should be considered concomitantly to the MCLR to protect the graft and potentially reduce graft failures. LEVEL OF EVIDENCE: Level III.

The anteromedial retinaculum in ACL-injured knees: An overlooked injury?

PURPOSE: The purpose of this study was to retrospectively analyse the pattern of injury to the medial knee structures in anterior cruciate ligament (ACL) injured patients. It was hypothesised that anteromedial injuries would be more common than posteromedial lesions. METHODS: One hundred and twenty subjects aged 18-25 years with a primary ACL injury were included. Patients were excluded if the time between injury and magnetic resonance imaging (MRI) was more than 28 days or if a knee dislocation or fracture was present. The MRIs were analysed with particular emphasis on injuries to the medial knee structures, menisci and bone bruise patterns. Injuries to the ligaments and anteromedial retinaculum (AMR) were graded according to severity, ranging from periligamentous oedema (grade I), partial fibre disruption of less or more than 50% (grade IIa or IIb) to complete tears (grade III). RESULTS: AMR injury was seen in 87 subjects (72.5%) on the coronal plane and in 88 (73.3%) on the axial plane, with grade III lesions observed in 27 (22.5%) and 29 knees (24.2%). Injuries to the superficial medial collateral ligament (sMCL), deep MCL (dMCL) and posterior oblique ligament (POL) were detected in 60 patients (50%), 93 patients (77.5%) and 38 patients (31.6%). However, grade III injuries to the POL were observed in only seven knees (5.8%). Medial meniscus injuries were associated with lesions of the sMCL and AMR (p < 0.05), while lateral meniscus injuries were significantly more common in patients with dMCL rupture (p < 0.05). CONCLUSION: Data from this study suggest that injuries to the AMR are much more common than posteromedial lesions in subjects with ACL injuries. LEVEL OF EVIDENCE: Level IV.

Comparison of Time-Zero Primary Stability Between a Biodegradable Magnesium Bone Staple and Metal Bone Staples for Knee Ligament Fixation: A Biomechanical Study in a Porcine Model.

Background: Bone staples have been shown previously to be a viable modality for cortical tendon graft fixation in ligament knee surgery. However, soft tissue reactions have been reported, making implant removal necessary. Magnesium alloys are a promising material for biodegradable orthopaedic implants, with mechanical properties closely resembling those of human bone. Purpose: To compare the primary stability of a biodegradable bone staple prototype made from magnesium to bone staples made from metal in the cortical fixation of tendon grafts during knee surgery. Study Design: Controlled laboratory study. Methods: Primary stability of peripheral tendon graft fixation was assessed in a porcine model of medial collateral ligament reconstruction. Two commercially available metal bone staples (Richards fixation staple with spikes [Me1] and spiked ligament staple [Me2]) were compared with a magnesium bone staple prototype for soft tissue fixation. Primary stability was assessed using a uniaxial materials testing machine. Cyclic loading at 50 and 100 N was applied for 500 cycles each, followed by load-to-failure testing. Results: After 500 cycles at 50 N, elongation was 1.5 ± 0.5 mm in the Me1 group, 1.9 ± 0.5 mm in the Me2 group, and 1.8 ± 0.4 mm in the magnesium group. After 1000 cycles of loading (500 cycles at 50 N and 500 at 100 N), elongation was 3.6 ± 0.9 mm in the Me1 group, 3.5 ± 0.6 mm in the Me2 group, and 4.1 ± 1.0 mm in the magnesium group. No significant differences regarding elongation were found between the groups. Load to failure was 352 ± 115 N in the Me1 group, 373 ± 77 N in the Me2 group, and 449 ± 92 N in the magnesium group, with no significant difference between the groups. Conclusion: In this study, the magnesium bone staples provided appropriate time-zero biomechanical primary stability in comparison with metal bone staples and may therefore be a feasible alternative for cortical fixation of tendon grafts in knee surgery. Clinical Relevance: The biodegradability of magnesium bone staples would eliminate the need for later implant removal.

The Effect of Varying Sizes of Ramp Lesions in the ACL-Deficient and Reconstructed Knee: A Biomechanical Robotic Investigation.

BACKGROUND: Conflicting evidence has been reported regarding the biomechanical relevance of ramp lesions (RLs) on knee kinematics. Furthermore, the influence of the defect size of the RLs on anterior tibial translation (ATT) and external rotation (ER) is currently unknown. PURPOSE: To evaluate the influence of RL defect size on knee kinematics in anterior cruciate ligament (ACL) deficiency and after simulated ACL reconstruction (sACLR). STUDY DESIGN: Controlled laboratory study. METHODS: Eight cadaveric knee specimens were tested in a 6 degrees of freedom robotic test setup. Force-controlled clinical laxity tests were performed with 200 N of axial compression in 0°, 30°, 60°, and 90° of flexion: 5 N·m internal rotation (IR)/ER torque, 134 N ATT force, and an anteromedial drawer test consisting of 134 N ATT force under 5 N·m ER torque. After determining the native knee kinematics, the ACL was cut at the tibial insertion, followed by a transosseous refixation to simulate a surgical repair or reconstruction (simulated ACL reconstruction; sACLR). An RL was sequentially created with a length of 1, 2, and 3 cm. Each state of the RL was evaluated in the ACL-deficient state and after sACLR. RESULTS: In the ACL-deficient state, only an RL of 3 cm length resulted in a significant increase of ATT in 30° of flexion (mean difference 0.73 mm; 95% CI, 0.36-1.1 mm). After sACLR, an RL had no significant effect. When looking at ER, an RL significantly increased ER in full extension in the ACL-deficient state in 2 cm (mean difference 0.9°; 95% CI, 0.08°-1.74°) and 3 cm length (mean difference 1.9°; 95% CI, 0.57-3.25). Furthermore, a 3-cm RL significantly increased IR in 0° of flexion in the ACL-deficient state (mean difference 1.9°; 95% CI, 0.2°-3.6°). No effect of ramp lesions on rotation was found after sACLR. CONCLUSION: RLs result in a small increase in ATT, ER, and IR in ACL-deficient knees at early flexion angles, but not after sACLR. CLINICAL RELEVANCE: Small RLs did not change time-zero knee kinematics and may, therefore, be left untreated, especially when the ACL is reconstructed.

Exposure of Hoffa Fractures Is Improved by Posterolateral and Posteromedial Extensile Approaches: A Qualitative and Quantitative Anatomical Study.

BACKGROUND: The current literature lacks recommendations regarding surgical approaches to best visualize and reduce Hoffa fractures. The aims of this study were to (1) define surgical corridors to the posterior portions of the lateral and medial femoral condyles and (2) compare the articular surface areas visible with different approaches. METHODS: Eight fresh-frozen human cadaveric knees (6 male and 2 female donors; mean age, 68.2 ± 10.2 years) underwent dissection simulating 6 surgical approaches to the distal femur. The visible articular surface areas for each approach were marked using an electrocautery device and subsequently analyzed using image-processing software. The labeled areas of each femoral condyle were statistically compared. RESULTS: At 30° of flexion, visualization of the posterior portions of the lateral and medial femoral condyles was not possible by lateral and medial parapatellar approaches, as only the anterior 29.4% ± 2.1% of the lateral femoral condyle and 25.6% ± 2.8% of the medial condyle were exposed. Visualization of the lateral femoral condyle was limited by the posterolateral ligamentous structures, hence a posterolateral approach only exposed its central (13.1% ± 1.3%) and posterior (12.4% ± 1.1%) portions. Posterolateral extension by an osteotomy of the lateral femoral epicondyle significantly improved the exposure to 53.4% ± 2.7% and, when combined with a Gerdy's tubercle osteotomy, to 70.9% ± 4.1% (p < 0.001). For the posteromedial approach, an arthrotomy between the anteromedial retinaculum and the superficial medial collateral ligament, and one between the posterior oblique ligament and the medial gastrocnemius tendon, allowed visualization of the central (13.5% ± 2.2%) and the posterior (14.6% ± 2.3%) portions of the medial femoral condyle, while a medial femoral epicondyle osteotomy significantly improved visualization to 66.1% ± 5.5% (p < 0.001). CONCLUSIONS: Visualization of the posterior portions of the femoral condyles is limited by the specific anatomy of each surgical corridor. Extension by osteotomy of the femoral epicondyles and Gerdy's tubercle significantly improved articular surface exposure of the femoral condyles. CLINICAL RELEVANCE: Knowledge of the surgical approach-specific visualization of the articular surface of the femoral condyles might be helpful to properly reduce small Hoffa fragments.

Management after acute injury of the anterior cruciate ligament (ACL). Part 3: Recommendation on surgical treatment.

PURPOSE: The aim of this consensus project was to give recommendations regarding surgical treatment of the anterior cruciate ligament (ACL) injured patient. METHODS: For this consensus process, an expert, steering and rating group was formed. In an initial online meeting, the steering group, together with the expert group, formed various key topic complexes for which multiple questions were formulated. For each key topic, a structured literature search was performed by the steering group. The results of the literature review were sent to the rating group with the option to give anonymous comments until a final consensus voting was performed. Sufficient consensus was defined as 80% agreement. RESULTS: During this consensus process, 30 topics regarding the surgical management and technique of ACL reconstruction were identified. The literature search for each key question resulted in 30 final statements. Of these 30 final statements, all achieved consensus. CONCLUSIONS: This consensus process has shown that surgical treatment of ACL injury is a complex process. Various surgical factors influence patient outcomes. The proposed treatment algorithm can be used as a decision aid for the surgeon. LEVEL OF EVIDENCE: Level V.

[Injuries of the medial side of the knee : When and how should they be treated?] / Verletzungen des medialen Bandapparats des Kniegelenks : Wann und wie therapieren?

Different medial structures are responsible for restraining valgus rotation, external rotation, and anteromedial rotation. When injured this can result in various degrees of isolated and combined instabilities. In contrast to earlier speculation, the posterior oblique ligament (POL) is no longer considered to be the main stabilizer of anteromedial rotatory instability (AMRI). Acute proximal medial ruptures are typically managed conservatively with very good clinical results. Conversely, acute distal ruptures usually require a surgical intervention. Chronic instabilities mostly occur in combination with instabilities of the anterior cruciate ligament (ACL). The clinical examination is a particularly important component in these cases to determine the indications for surgery for an additional medial reconstruction. In cases of severe medial and anteromedial instabilities, surgical treatment should be considered. Biomechanically, a combined medial and anteromedial reconstruction appears to be superior to other reconstruction methods; however, there is currently a lack of clinical studies to confirm this biomechanical advantage.

K2P2.1 is a regulator of inflammatory cell responses in idiopathic inflammatory myopathies.

K2P2.1 (TREK1), a two-pore domain potassium channel, has emerged as regulator of leukocyte transmigration into the central nervous system. In the context of skeletal muscle, immune cell infiltration constitutes the pathogenic hallmark of idiopathic inflammatory myopathies (IIMs). However, the underlying mechanisms remain to be elucidated. In this study, we investigated the role of K2P2.1 in the autoimmune response of IIMs. We detected K2P2.1 expression in primary skeletal muscle and endothelial cells of murine and human origin. We observed an increased pro-inflammatory cell response, adhesion and transmigration by pharmacological blockade or genetic deletion of K2P2.1 in vitro and in in vivo myositis mouse models. Of note, our findings were not restricted to endothelial cells as skeletal muscle cells with impaired K2P2.1 function also demonstrated a strong pro-inflammatory response. Conversely, these features were abrogated by activation of K2P2.1 and improved the disease course of a myositis mouse model. In humans, K2P2.1 expression was diminished in IIM patients compared to non-diseased controls arguing for the translatability of our findings. In summary, K2P2.1 may regulate the inflammatory response of skeletal muscle. Further research is required to understand whether K2P2.1 could serve as novel therapeutic target.

Additional Plate Fixation of Hinge Fractures After Varisation Distal Femoral Osteotomies Provides Favorable Torsional Stability: A Biomechanical Study.

BACKGROUND: Hinge fractures are considered risk factors for delayed or nonunion of the osteotomy gap in distal femoral osteotomies (DFOs). Limited evidence exists regarding the treatment of hinge fractures after DFO, which could improve stability and thus bone healing. PURPOSE: To (1) examine the effect of hinge fractures on the biomechanical properties of the bone-implant construct, (2) evaluate the biomechanical advantages of an additional fixation of a hinge fracture, and (3) test the biomechanical properties of different types of varisation DFOs. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 32 fresh-frozen human distal femora equally underwent medial closing wedge DFO or lateral opening wedge DFO using a unilateral locking compression plate. The following conditions were serially tested: (1) preserved hinge; (2) hinge fracture along the osteotomy plane; (3) screw fixation of the hinge fracture; and (4) locking T-plate fixation of the hinge fracture. Using a servo-hydraulic materials testing machine, we subjected each construct to 15 cycles of axial compression (400 N; 20 N/s) and internal and external rotational loads (10 N·m; 0.5 N·m/s) to evaluate the stiffness. The axial and torsional hinge displacement was recorded using a 3-dimensional optical measuring system. Repeated-measures 1-way analysis of variance and post hoc Bonferroni correction were used for multiple comparisons. Statistical significance was set at P < .05. RESULTS: Independent from the type of osteotomy, a fractured hinge significantly (P < .001) increased rotational displacement and reduced stiffness of the bone-implant construct, resulting in ≥1.92 mm increased displacement and ≥70% reduced stiffness in each rotational direction, while the axial stiffness remained unchanged. For both procedures, neither a screw nor a plate could restore intact rotational stiffness (P < .01), while only the plate was able to restore intact rotational displacement. However, the plate always performed better compared with the screw, with significantly higher and lower values for stiffness (+38% to +53%; P < .05) and displacement (-55% to -72%; P < .01), respectively, in ≥1 rotational direction. At the same time, the type of osteotomy did not significantly affect axial and torsional stability. CONCLUSION: Hinge fractures after medial closing wedge DFO and lateral opening wedge DFO caused decreased bone-implant construct rotational stiffness and increased fracture-site displacement. In contrast, the axial stiffness remained unchanged in the cadaveric model. CLINICAL RELEVANCE: When considering an osteosynthesis of a hinge fracture in a DFO, an additional plate fixation was the construct with the highest stiffness and least displacement, which could restore intact hinge rotational displacement.

Interference screws manufactured from magnesium display similar primary stability for soft tissue anterior cruciate ligament graft fixation compared to a biocomposite material - a biomechanical study.

PURPOSE: Biodegradable interference screws (IFS) can be manufactured from different biomaterials. Magnesium was previously shown to possess osteoinductive properties, making it a promising material to promote graft-bone healing in anterior cruciate ligament reconstruction (ACLR). The purpose of this study was to compare IFS made from magnesium to a contemporary biocomposite IFS. METHODS: In a porcine model of ACL reconstruction, deep porcine flexor tendons were trimmed to a diameter of 8 mm, sutured in Krackow technique, and fixed with either 8 × 30 mm biocomposite IFS (Bc-IFS) or 8 × 30 mm magnesium IFS (Mg-IFS) in an 8 mm diameter bone tunnel in porcine tibiae. Cyclic loading for 1000 cycles from 0 to 250 N was applied, followed by load to failure testing. Elongation, load to failure and stiffness of the tested constructs was determined. RESULTS: After 1000 cycles at 250 N, elongation was 4.8 mm ± 1.5 in the Bc-IFS group, and 4.9 mm ± 1.5 in the Mg-IFS group. Load to failure was 649.5 N ± 174.3 in the Bc-IFS group, and 683.8 N ± 116.5 in the Mg-IFS group. Stiffness was 125.3 N/mm ± 21.9 in the Bc-IFS group, and 122.5 N/mm ± 20.3 in the Mg-IFS group. No significant differences regarding elongation, load to failure and stiffness between Bc-IFS and Mg-IFS were observed. CONCLUSION: Magnesium IFS show comparable biomechanical primary stability in comparison to biocomposite IFS and may therefore be an alternative to contemporary biodegradable IFS.

[Intra-articular proximal tibia fractures]. / Intraartikuläre proximale Tibiafraktur.

The incidence of proximal intra-articular tibial fractures is continuously increasing. In addition to high-energy trauma in young patients, osteoporotic fractures occur more frequently in geriatric patients. After a thorough clinical examination including X­ray and computed tomography (CT) imaging, consolidation of the soft tissue is followed by surgical treatment to achieve the best possible anatomic reconstruction of the articular surface. Nonanatomic reduction with articular gaps >2.5 mm leads to a significantly increased risk of osteoarthritis. Selection of the surgical approach and planning of the osteosynthesis are based on the fracture morphology and the existing soft tissue damage. In addition to arthroscopically assisted percutaneous procedures, sophisticated osteosynthesis is often necessary, which requires several surgical approaches. In this context, posterior surgical approaches are becoming increasingly more important. Primary knee arthroplasty can also play a role, particularly in older patients.

The Anterior Fibers of the Superficial MCL and the ACL Restrain Anteromedial Rotatory Instability.

BACKGROUND: There is limited knowledge about how the anterior cruciate ligament (ACL) and capsuloligamentous structures on the medial side of the knee act to control anteromedial rotatory knee instability. PURPOSE: To investigate the contribution of the medial retinaculum, capsular structures (anteromedial capsule, deep medial collateral ligament [MCL], and posterior oblique ligament), and different fiber regions of the superficial MCL to restraining knee laxity, including anteromedial rotatory instability. STUDY DESIGN: Controlled laboratory study. METHODS: Eight fresh-frozen human cadaveric knees were tested using a 6 degrees of freedom robotic testing system in a position-controlled mode. Loads of 10 N·m valgus rotation, 5 N·m tibial external rotation, 5 N·m tibial internal rotation, and 134 N anterior tibial translation in 5 N·m external rotation were applied at different flexion angles. The motion of the intact knee at 0° to 120° of flexion was replicated after sequential excision of the sartorial fascia; anteromedial retinaculum; anteromedial capsule; anterior, middle, and posterior fibers of the superficial MCL; the deep MCL; the posterior oblique ligament; and the ACL. The reduction in force/torque indicated the contribution of each resected structure to resisting laxity. A repeated-measures analysis of variance with a post hoc Bonferroni test was used to analyze the relative force and torque changes from the intact state. RESULTS: The superficial MCL was the most important restraint to valgus rotation from 0° to 120° and provided the largest contribution to resisting external rotation between 30° and 120° of knee flexion, gradually increasing from 25.2% ± 7.4% at 30° to 36.9% ± 15.4% at 90°. The posterior oblique ligament contributed significantly to resisting valgus rotation only in extension (17.2% ± 12.1%) but was the major restraint to internal rotation at 0° (46.7% ± 13.1%) and 30° (30.4% ± 17.7%) of flexion. The sartorial fascia and anteromedial retinaculum resisted ER at all knee flexion angles (P < .05) and was the single most important restraint in the extended knee (19.5% ± 11%). The capsular structures (anteromedial capsule and deep MCL) had a combined contribution of 20% ± 11.5% at 0° and 23.4% ± 10.5% at 120° of knee flexion but were less important from 30° to 90°. The ACL was the primary restraint to anterior tibial translation in external rotation between 0° and 60° of flexion (50.2% ± 16.9% at 30°), but the superficial MCL was more important at 90° to 120° of knee flexion (36.8% ± 16.4% at 90°). The anterior, middle, and posterior regions of the superficial MCL contributed differently to the simulated laxity tests. The anterior fibers were the most important part of the superficial MCL in resisting external rotation and combined anterior tibial translation in external rotation. CONCLUSION: The superficial MCL not only was the primary restraint to valgus rotation throughout the range of knee flexion but also importantly contributed to resisting anterior tibial translation in external rotation, particularly in deeper flexion in the cadaveric model. The anterior fibers of the superficial MCL are the most important superficial MCL fibers in resisting anterior tibial translation in external rotation. This study suggests that a medial reconstruction that reproduces the function of the posterior MCL fibers and posterior oblique ligament may not best control anteromedial rotatory instability. CLINICAL RELEVANCE: Based on these data, there is a need for an individualized medial reconstruction to address different types of medial injury patterns and instabilities.

Recurrent Instability Rate and Subjective Knee Function following Accelerated Rehabilitation after ACL Reconstruction in Comparison to a Conservative Rehabilitation Protocol.

INTRODUCTION: The Purpose of the present study was to assess the outcome of anterior cruciate ligament reconstruction (ACLR) with an accelerated rehabilitation protocol and to compare it to a conservative rehabilitation protocol. It was hypothesized that an accelerated rehabilitation protocol, including brace-free early weight bearing, would result in a higher rate of recurrent instability and revision surgery compared to a conservative rehabilitation protocol. METHODS: From 2016 to 2017, two different rehabilitation protocols for isolated ACLR were used at a high-volume knee surgery center. A total of 65 consecutive patients with isolated hamstring ACLR, of whom n = 33 had been treated with an accelerated (AccRehab) and n = 32 with a conservative rehabilitation protocol (ConRehab), were retrospectively included in the study. Patients were evaluated for recurrent instability, revision surgery, and other complications at a mean follow-up period of 64 ± 7.4 months. In addition, Tegner Activity Scale, Lysholm Score, and IKDC-subjective Score were evaluated. Statistical comparison between the two groups was performed utilizing Fisher's exact test and Student's t-test. RESULTS: Mean age (29.3 vs. 26.6 years) and preoperative Tegner Score (6.4 vs. 5.9) were comparable between both groups. At 64 ± 7.4 months after ACLR, six cases of recurrent instability were reported in the AccRehab group (18%) in comparison to three cases (9%) in the ConRehab group (p = n.s.). There was no significant difference regarding revision surgery and further complications. Furthermore, no significant difference was found between both groups regarding Tegner (5.5 ± 1.9 vs. 5.5 ± 1.2), Lysholm (93.6 ± 6.3 vs. 89.3 ± 10.7), and IKDC score (89.7 ± 7.9 vs. 86.7 ± 12.1). CONCLUSION: No significant disadvantage of an accelerated rehabilitation protocol following ACLR was found in terms of recurrent instability rate, revision surgery, or patient-reported outcome. However, a trend towards a higher reinstability rate was found for an accelerated rehabilitation protocol. Future level one trials evaluating brace-free early weight bearing following ACLR are desirable.

The "Bankart knee": high-grade impression fractures of the posterolateral tibial plateau lead to increased translational and anterolateral rotational instability of the ACL-deficient knee.

PURPOSE: The aim of this biomechanical cadaver study was to evaluate the effects of high-grade posterolateral tibia plateau fractures on the kinematics of anterior cruciate ligament (ACL)-deficient joints; it was hypothesized that, owing to the loss of the integrity of the osseous support of the posterior horn of the lateral meniscus (PHLM), these fractures would influence the biomechanical function of the lateral meniscus (LM) and consequently lead to an increase in anterior translational and anterolateral rotational (ALR) instability. METHODS: Eight fresh-frozen cadaveric knees were tested using a six-degree-of-freedom robotic setup (KR 125, KUKA Robotics, Germany) with an attached optical tracking system (Optotrack Certus Motion Capture, Northern Digital, Canada). After the passive path from 0 to 90° was established, a simulated Lachman test and pivot-shift test as well as external rotation (ER) and internal rotation (IR) were applied at 0°, 30°, 60° and 90° of flexion under constant 200 N axial loading. All of the parameters were initially tested in the intact and ACL-deficient states, followed by two different types of posterolateral impression fractures. The dislocation height was 10 mm, and the width was 15 mm in both groups. The intraarticular depth of the fracture corresponded to half of the width of the posterior horn of the lateral meniscus in the first group (Bankart 1) and 100% of the meniscus width in the second group (Bankart 2). RESULTS: There was a significant decrease in knee stability after both types of posterolateral tibial plateau fractures in the ACL-deficient specimens, with increased anterior translation in the simulated Lachman test at 0° and 30° of knee flexion (p = 0.012). The same effect was seen with regard to the simulated pivot-shift test and IR of the tibia (p = 0.0002). In the ER and posterior drawer tests, ACL deficiency and concomitant fractures did not influence knee kinematics (n.s.). CONCLUSION: This study demonstrates that high-grade impression fractures of the posterolateral aspect of the tibial plateau increase the instability of ACL-deficient knees and result in an increase in translational and anterolateral rotational instability.

Comparison of Onlay Anchor Fixation Versus Transosseous Fixation for Lateral Extra-articular Tenodesis During Revision ACL Reconstruction.

Background: There is evidence on the clinical effectiveness of the Lemaire technique for lateral extra-articular tenodesis (LET) in patients undergoing revision anterior cruciate ligament reconstruction (ACLR), but the best fixation technique is unknown. Purpose: To compare the clinical outcomes of 2 fixation techniques after revision ACLR: (1) onlay anchor fixation, which would avoid tunnel conflict and physis injury, and (2) transosseous tightening and interference screw fixation. Pain at the area of LET fixation was also assessed. Study Design: Cohort study; Level of evidence, 3. Methods: This was a retrospective 2-center study of patients with first-time revision ACLR and either LET with anchor fixation (aLET) with a 2.4-mm suture anchor or LET with transosseous fixation (tLET). Outcomes at minimum 12-month follow-up were assessed with the International Knee Documentation Committee score, Knee injury and Osteoarthritis Outcome Score, visual analog scale for pain at the LET fixation area, Tegner score, and anterior tibial translation (ATT). A subgroup analysis within the aLET group investigated passing the graft over or under the lateral collateral ligament (LCL). Results: In total, 52 patients were included (26 patients in each group); the mean ± SD follow-up was 13.7 ± 3.4 months. No statistically significant differences were detected between the groups with respect to patient-reported outcome scores, clinical examination, or instrumented testing (side-to-side difference in ATT at 30° of flexion; aLET, 1.5 ± 2.5 mm; tLET, 1.6 ± 1.7 mm). Clinical failure was detected in 1 patient with aLET and none with tLET. Subgroup analysis revealed a small, nonsignificant flexion deficit in knees in which the iliotibial band strand was passed under (n = 42) or over (n = 10) the LCL. No clinically relevant tenderness was detected at the area of LET fixation in any group (aLET, 0.6 ± 1.3; tLET, 0.9 ± 1.7; over the LCL, 0.2 ± 0.6; under the LCL, 0.9 ± 1.6). Conclusion: Onlay anchor fixation and transosseous fixation of the LET were equivalent with respect to outcome scores and instrumented ATT testing. Clinically, there were minor differences in passage of the LET graft over or under the LCL.

Refixation of a Large Osteochondral Fragment with Magnesium Compression Screws-A Case Report.

INTRODUCTION: Osteochondrosis dissecans (OCD) is a disease affecting the subchondral bone and the overlying articular cartilage. The etiology is most likely a combination of biological and mechanical factors. The incidence is highest in children >12 years old and it predominantly affects the knee. In high-grade OCD lesions, free osteochondral fragments usually are refixed via titanium screws or biodegradable screws or pins. In this case, headless compression screws made from magnesium were used for refixation. CASE REPORT: A thirteen-year-old female patient with a two-year history of knee pain was diagnosed with an OCD lesion of the medial femoral condyle. After initial conservative treatment, displacement of the osteochondral fragment occurred. Refixation was performed using two headless magnesium compression screws. At the 6 months follow up, the patient was pain free, and the fragment showed progressive healing while the implants were biodegrading. DISCUSSION: Existing implants for refixation of OCD lesions either require subsequent removal or show less stability and possible inflammatory reactions. The new generation of magnesium screws used in this case did not lead to a gas release, as described for previous magnesium implants, while maintaining stability during continuous biodegradation. CONCLUSIONS: The data available to date on magnesium implants for the treatment of OCD are promising. However, the evidence on the magnesium implants in refixation surgery of OCD lesions is still limited. Further research needs to be conducted to provide data on outcomes and possible complications.

Contributors to self-report motor function after anterior cruciate ligament reconstruction.

Numerous functional factors may interactively contribute to the course of self-report functional abilities after anterior cruciate ligament  (ACL)-reconstruction. This study purposes to identify these predictors using exploratory moderation-mediation models in a cohort study design. Adults with post unilateral ACL reconstruction (hamstring graft) status and who were aiming to return to their pre-injury type and level of sport were included. Our dependent variables were self-reported function, as assessed by the the KOOS subscales sport (SPORT), and activities of daily living (ADL). The independent variables assessed were the KOOS subscale pain and the time since reconstruction [days]. All other variables (sociodemographic, injury-, surgery-, rehabilitation-specific, kinesiophobia (Tampa Scale of Kinesiophobia), and the presence or absence of COVID-19-associated restrictions) were further considered as moderators, mediators, or co-variates. Data from 203 participants (mean 26 years, SD 5 years) were finally modelled. Total variance explanation was 59% (KOOS-SPORT) and 47% (KOOS-ADL). In the initial rehabilitation phase (< 2 weeks after reconstruction), pain was the strongest contributor to self-report function (KOOS-SPORT: coefficient: 0.89; 95%-confidence-interval: 0.51 to 1.2 / KOOS-ADL: 1.1; 0.95 to 1.3). In the early phase (2-6 weeks after reconstruction), time since reconstruction [days] was the major contributor (KOOS-SPORT: 1.1; 0.14 to 2.1 / KOOS-ADL: 1.2; 0.43 to 2.0). Starting with the mid-phases of the rehabilitation, self-report function was no longer explicitly impacted by one or more contributors. The amount of rehabilitation [minutes] is affected by COVID-19-associated restrictions (pre-versus-post: - 672; - 1264 to - 80 for SPORT / - 633; - 1222 to - 45 for ADL) and by the pre-injury activity scale (280; 103 to 455 / 264; 90 to 438). Other hypothesised contributors such as sex/gender or age were not found to mediate the time or pain, rehabilitation dose and self-report function triangle. When self-report function is rated after an ACL reconstruction, the rehabilitation phases (early, mid, late), the potentially COVID-19-associated rehabilitation limitations, and pain intensity should also be considered. As, for example, pain is the strongest contributor to function in the early rehabilitation phase, focussing on the value of the self-report function only may, consequently, not be sufficient to rate bias-free function.